±50Vdc or ±50 mA Full Range inputs with sensor suplply Voltage or current active / passive outputs Direct USB configuration offers…
The KOS203P in-head transmitter incorporates the latest digital technology to ensure accurate drift free linearisation. It connects to any standard RTD Temperature sensor and...
The KOS203P in-head transmitter incorporates the latest digital technology to ensure accurate drift free linearisation. It connects to any standard RTD…
The transmitter is an in head 4-20mA transmitter that connects to a standard thermocouple sensor and converts the sensor temperature to a 4-20mA signal.
An LED provides vis...
The LIKA IF42 Converter is designed for Absolute encoders. To convert from SSI to Bit Parallel.
LIKA IF92 USB to RS-232 Converter for connection of devices fitted with RS-232 port such as encoders (ASR58, AMR58, EM58 PA, HM58 P), Position displays (LD200), Rotary actuato...
Temperature Converter for DIN Rail Input: Thermocouple J,K Output: 0-10V; 0-4-20mA Isolation: 2 ways 2.5 kV Power Supply: 24V AC/DC…
Installation Kit on DIN RAIL for in-head converters.
The kit ACK103 (KOS Converters) Includes:
A. 1 M4 screws to secure the support to the converter.
B. 1 Support m...
The P17 Transducer is designed to convert the signal from temperature, resistance or voltage sensors into a 4...20mA current signal.…
The P20 Programmable transducer is designed to convert the temperature resistance, voltage from shunt and standard signals into a standard constant current or contact voltage ...
The P20 Programmable transducer is designed to convert the temperature resistance, voltage from shunt and standard signals into a standard…
The P20H Transducer are applied for the continuous conversions of d.c. voltage and d.c. current into a standard d.c. current, d.c. voltage signal or RS485 digital signal.
&...
The P20H Transducer are applied for the continuous conversions of d.c. voltage and d.c. current into a standard d.c. current,…
P20Z Transducer is designed to a continuous conversion of the rms current value or alternating voltage without the constant component into a standard DC current or DC voltage ...
P20Z Transducer is designed to a continuous conversion of the rms current value or alternating voltage without the constant component…
The P21Z Transducer is designed for a continuous conversion of a.c. current or a.c. voltage without the constant component or frequency into a standard d.c. current or d.c. vo...
The P21Z Transducer is designed for a continuous conversion of a.c. current or a.c. voltage without the constant component or…
The P30H transducer is designed for photovoltaic, battery, telecommunications and railway installations. P30H measures and records current, voltage, power, energy and other d....
The P30H transducer is designed for photovoltaic, battery, telecommunications and railway installations. P30H measures and records current, voltage, power, energy…
The P30O Programmable transducer is designed to convert the number of pulses, number of working hours, frequency, period and rotational speed into a digital or standard curren...
The P30O Programmable transducer is designed to convert the number of pulses, number of working hours, frequency, period and rotational…
The P30P is a transducer which is designed to measure 1-phase power network parameters. It can be measured and recorded up to 16 parameters.
The output signal is galvanical...
The P30P is a transducer which is designed to measure 1-phase power network parameters. It can be measured and recorded…
The P30U transducer is designed to convert temperature, resistance, standard voltage and current signals into a standard DC voltage or DC current signal. The output signal is ...
The P43 is designed for the conversion of 3-phase, 3-4 wire power network parameters, in balanced or unbalanced systems.
The Lumel PD51 Converter/Repeater RS485/RS232 Interface is a digital device that is designed to convert RS232 into a RS485 interface or the RS485 interface into a RS485 interf...
The Lumel PD51 Converter/Repeater RS485/RS232 Interface is a digital device that is designed to convert RS232 into a RS485 interface…
The Lumel SM1 - 2-channel module of analog inputs is designed to convert standard signals, resistance or temperature signals into numerical data accessible through the RS485 o...
The Lumel SM1 - 2-channel module of analog inputs is designed to convert standard signals, resistance or temperature signals into…
The Lumel SM2 is a 4 channel module with Analog inputs and is designed to convert the standard signals, resistance or temperature signals into numerical data accessible throug...
