WearDetect Oil Condition Sensor with Display

The Gill WearDetect (4212) Oil Condition Sensor with Display features the same measurement options as the wearDetect Oil Condition Sensor, with an additional local indication display. The local LED display provides a simple red, amber and green light indication of the status of the condition of the machine.

  • Captures fine wear & coarse failure ferrous particles
  • Water in oil contamination detection 
  • Oil temperature or oil presence measurement
  • Reduce unplanned downtime
  • In-line electronics 

Fine and coarse particle contamination is a major cause of breakdowns in hydraulic and lubrication oil systems; therefore continuous real-time oil debris monitoring plays a crucial role in developing a predictive maintenance strategy.

The WearDetect (4212) Oil Condition Sensor offers 4 types of measurement outputs and with no specialist knowledge required to analyse the outputs, the sensor offers a low cost of ownership. It allows the end user to identify and thereby eliminate an unplanned breakdown; the oil condition sensor gives a quick and positive return-on-investment.

17 New thread adapters now available:

  • M20 x 1.5
  • M22 x 1.5
  • M24 x 2.0
  • M25 x 1.5
  • M26 x 1.5
  • M27 x 2.0
  • M30 x 1.5
  • M42 x 2.0
  • 1/2″ BSPP
  • 3/4″ BSPP
  • 1 1/2″ BSPP
  • 1″ BSPP
  • 1″14 UNF
  • 1″18 UNF
  • 3/4″ x 16 UNF
  • 1 1/8″ 12 UNF
  • 1 5/16″ 12 UNF

 

 

Description

The Gill WearDetect (4212) Oil Condition Sensor with Display features the same measurement options as the wearDetect Oil Condition Sensor, with an additional local indication display. The local LED display provides a simple red, amber and green light indication of the status of the condition of the machine.

Fine and coarse particle contamination is a major cause of breakdowns in hydraulic and lubrication oil systems; therefore continuous real-time oil debris monitoring plays a crucial role in developing a predictive maintenance strategy.

  • Captures fine wear & coarse failure ferrous particles
  • Water in oil contamination detection
  • Oil temperature or oil presence measurement
  • Reduce unplanned downtime
  • Local indicator display

Condition-based or predictive maintenance is a strategy that improves availability and reliability whilst reducing costs. Monitoring for early indicators of potential component failure allows for planned investigation and repairs to be carried out before equipment failure occurs.

Continuous real-time monitoring via sensors is a vital element to this strategy, and the condition monitoring sensor range by Gill provides an innovative insight into the health of gearbox and transmission systems.

Combining four of the most common modes of machinery failure-ferrous wear and failure particles, water in oil contamination and oil presence indication – in one compact unit, provides a valuable tool in helping you maximise machinery availability and minimising expensive downtime.

View all Gill Products

Follow us on Facebook

Output: Analogue 0-10V, 4-20mA, CAN J1939
Report Rate: Voltage, 4-20mA 10Hz, CAN 1Hz
Analogue Resolution: 10 bit
Supply Voltage: Voltage + 6 to +26V DC, 4-20mA +9 to +26 V DC, CAN +5 to +26 V DC
Power Consumption: Voltage <2.9W, 4-20mA <5.6W, CAN <2.8W OperatingTemperature: Sensor -40° to +150°C, Enclosure -40° to +85°C Ingress Protection: Sensor IP66 / IP68 / IP69K, Enclosure IP65 Size: Sensor 57 x Ø24.5mm, Enclosure 105.5 x 105.5 x 66mm Compatibility: Fuel, Oil, Coolant, Saltwater (see datasheet for more detail)