CDJ420 Joystick with 4-20mA Output

The Control Devices CDJ420 series joystick is available in single and dual axis configurations.

This joystick can be supplied with a battery rail voltage anywhere from 8-30 V dc. The device conditions the voltage and supplies the appropriate voltage levels to both ends of the joystick pot taps, as well as the centre tap. The output from the joystick is 4-20mA. The joystick can be configured to give either 4mA or 12mA as the centre current. Directional switches are also provided if a discrete signal for displacement is required.

  • Rugged mechanical design
  • Industry standard 4-20mA output
  • Optional outputs available (0-24mA)
  • Multiple Ergonomic grips
  • Custom Switch layouts
  • Optional dual output redundancy
  • MOSFET isolated directional switches
  • Internal power regulation

View Handle options here

Dielectric Strength 2500V
Insulation Resistance 10M Ohm
Supply Voltage +8V to +30V DC
Current Consumption 40mA
Over Current and Over Voltage Protection Yes - TVS Diode
Polarity Protection Yes - Diode
Output type Current
Number of Analogue inouts/Outputs 2
Output Range 4-20mA (Factory set – others available on
Life 5 million operations
Dielectric Strength 2500V
Insulation Resistance 10M Ohm
Shock 30g ±20% All axis IEC 68-2-27
Vibration 10Hz to 150Hz 1g ±3 dB IEC68-2-6
Ingress Protection IP50
Operating Temperature Range -40 + 85 C
Weight Approximately 700gms
Dimension See Drawing
Life 5 Million Operations

Content missing