NR30 DIN Rail mounted 3-phase power network meter
Designed for direct (up to 63A) and indirect measurements in 3-phase 4 wire/3 wire balanced and unbalanced systems.
- Measurement and recording of 54 power network parameters in 1-phase 2-wire or 3-phase 3 or 4 wire balanced and unbalanced systems.
- Harmonics up to 51st for current and voltage
- Baclit LCD screen, fully configurable by user
- 22 pages, 3 parameters in each
- 1 page with harmonics presentation
- Indications include the values of programmed ratios
- Memory of minimum and maximum presentation
- 2 Configurable alarm outputs
- Mode of supervisory relay for alarm outputs – additional function
- To make function active, please order appropriate license key – details in ordering code. Function can be also activated on the devices which have been already installed on the facility after software upgrade.
- Supervisory relay mode enables detection of following events:
- Voltage drop or growth
- Current drop or growth
- Phase loss
- Current or voltage unbalance
- Phase sequence
- User can specify:
- The thresholds of monitored events
- Monitoring of phase relay
- Memory of relay state
- Delay of switch-on/off relay
- Relay state after the event has occurred
- Optional: with additional module of analogue outputs – S4AO type (4 current or voltage outputs)
- RS485 digital output – MODBUS protocol
- Logging of up to 32 measured parameters in the internal memory 8 GB
- Modern and user friendly Ethernet interface 10/100 BASE-T:
- Protocol: MODBUS TCP/IP, HTTP, FTP
- Services: WWW Server, FTP server, DHCP Client
- Wide range of voltage supply
- 85…253 Vac or 90..300 Vdc
- 20…40 Vac or 20…60 Vdc
- Programming of parameters using free eCon software
- Battery backup RTC
- Modern design allows for installation of the meter in modular switchgear in accordance with EN 62208 (meter has a width of 6 modules) on 35mm rail
- External dimensions: 105 x 110 x 60 mm
Related Products
-
The DMR80 is a clock with date, temperature and timer function 800mm digit height. It is therefore ideal for viewing outdoors in long distance usage (up to 400m)
- ...
DMR80 Clock-Calendar-Chronometer-Thermometer 800mm
The DMR80 is a clock with date, temperature and timer function 800mm digit height. It is therefore ideal for viewing…
- ...
-
The DMR100 watch is a CLOCK-CALENDAR and CHRONOMETER, with a character height of 1000 mm. It is ideal to display both time and date in outdoor environments and from a great...
DMR100 Clock-Calendar-Chronometer-Thermometer 1000mm
The DMR100 watch is a CLOCK-CALENDAR and CHRONOMETER, with a character height of 1000 mm. It is ideal to display both time and…
-
The DMR17 display is a clock with date, temperature and timer function 170 mm digit height. It is therefore ideal for viewing outdoors in long distance usage (up to 85m).
DMR17 Clock-Calendar-Chronometer-Thermometer 170mm
The DMR17 display is a clock with date, temperature and timer function 170 mm digit height. It is therefore ideal…