SB1U Sensor Box

Sensor box containing one sensor and one signal conditioner with 0…5V output.

The SB1U is a pressure die cast aluminium sensor housing (IP65) with an integrated sensor for measuring uniaxial acceleration or inclination.
As well as the sensor, the box contains a signal conditioner with 0 … 5V output and a separate, highly stable supply voltage that can be used externally as a reference point. Furthermore, the signal conditioner includes an active low pass filter, whose upper cut-off frequency / settling time can be adjusted to suit the measurement task, and a noise voltage filter to guarantee the EMC. Interference signals caused by unwanted ground currents are eliminated by electrically isolating sensor and signal conditioner from the housing.
Unlike the SB2.., the SB1U can accommodate larger inclinometers, such as the NG.. series, that have a higher measuring accuracy. A special electronic temperature compensation system can significantly reduce the temperature sensitivity of the implemented sensor.
The compact PG metal cable gland and small housing size in combination with the max.5-wire connection enable the use of this high quality measuring system in harsh operating conditions.

  • Robust pressure die cast aluminium housing (IP65)
  • Robust pressure die cast aluminium housing (IP65) with saltwater proof coating
  • Twist free 4-point fastening of rigid, 3.2 mm think base PCB
  • Integrated signal conditioner with 0-5V output
  • Temperature drift compensation
  • 9V – 3 V supply voltage
  • All SEIKA sensors fit the housing and can be installed in different directions of operation
  • Output signal calibrated to customer’s specifications
  • Sensor and signal conditioner electrically isolated from housing
  • EMC certified
  • Highly stable sensor supply voltage
  • Programmable dynamic response
  • Either connection polarity
  • High overload resistance
  • Low pass filter with optional choice of cut-off frequency for suppression of interference of frequencies

 

Description

Seika SB1U Sensor box containing one sensor and one signal conditioner with 0…5V output.

The SB1U Sensor Box is a pressure die cast aluminium sensor housing (IP65) with an integrated sensor for measuring uniaxial acceleration or inclination.
As well as the sensor, the box contains a signal conditioner with 0 … 5V output and a separate, highly stable supply voltage that can be used externally as a reference point. Furthermore, the signal conditioner includes an active low pass filter, whose upper cut-off frequency / settling time can be adjusted to suit the measurement task, and a noise voltage filter to guarantee the EMC. Interference signals caused by unwanted ground currents are eliminated by electrically isolating sensor and signal conditioner from the housing.
Unlike the SB2.., the SB1U can accommodate larger inclinometers, such as the NG.. series, that have a higher measuring accuracy. A special electronic temperature compensation system can significantly reduce the temperature sensitivity of the implemented sensor.
The compact PG metal cable gland and small housing size in combination with the max.5-wire connection enable the use of this high quality measuring system in harsh operating conditions.

  • Robust pressure die cast aluminium housing (IP65)
  • Robust pressure die cast aluminium housing (IP65) with saltwater proof coating
  • Twist free 4-point fastening of rigid, 3.2 mm think base PCB
  • Integrated signal conditioner with 0-5V output
  • Temperature drift compensation
  • 9V – 3 V supply voltage
  • All SEIKA sensors fit the housing and can be installed in different directions of operation
  • Output signal calibrated to customer’s specifications
  • Sensor and signal conditioner electrically isolated from housing
  • EMC certified
  • Highly stable sensor supply voltage
  • Programmable dynamic response
  • Either connection polarity
  • High overload resistance
  • Low pass filter with optional choice of cut-off frequency for suppression of interference of frequencies

SEIKA develops, manufactures and distributes sensors for measurement of physical quantities and electronic and mechanical accessories for sensors. Inclinometers for nearly all existing tilt measurements and a series of robust accelerometers with integrated sensor electronics are SEIKA’s standard products. Next to these, SEIKA also manufactures a number of customer specific sensors.

Next to these standard products, Seika also manufactures level and humidity sensors for special applications as well as electronic components and sensor accessories.

For the full range of Seika products

Follow us on Facebook