DIG™ 100 Utility Guidance Systems

Gladiator Technologies DIG™ 100 Inertial Guidance System is an IP68 MEMS AHRS designed for downhole orientation and direction guidance applications. The small size of this AHRS (1″ diameter by 2.125″ length) enables its use in tight drilling and utility spaces. The DIGS™ 100 Inertial Guidance System provides temperature compensated RS422/RS485 output of pitch, roll and yaw angles. It’s low noise gyros and accels have a shock rating of 500g and a vibration rating of 5 g RMS making this unit ideal for utility guidance.

KEY SPECIFICATIONS:

  • 5°/hr In-Run Bias
  • 0.0028°/sec/√Hz ARW, 0.075mg/ √Hz VRW
  • 0.5° Yaw and Toolface Angles
  • VELOX™ Processing
  • SWaP-C
  • Development kit Available
  • Non-ITAR restricted

 

Description

Gladiator Technologies DIG™ 100 Inertial Guidance System is an IP68 MEMS AHRS designed for downhole orientation and direction guidance applications. The small size of this AHRS (1″ diameter by 2.125″ length) enables its use in tight drilling and utility spaces. The DIGS™ 100 Inertial Guidance System provides temperature compensated RS422/RS485 output of pitch, roll and yaw angles. It’s low noise gyros and accels have a shock rating of 500g and a vibration rating of 6 g RMS making this unit ideal for utility guidance.

KEY SPECIFICATIONS:

  • 5°/hr In-Run Bias
  • 0.0028°/sec/√Hz ARW, 0.075mg/ √Hz VRW
  • 0.5° Yaw and Toolface Angles
  • VELOX™ Processing
  • SWaP-C
  • Development kit Available
  • Non-ITAR restricted

Part numbered  configuration

DIG™ 100 – Gyroscope Range – Accelerometer Range – Configuration

  • DIGS™100-490-15-100

Gladiator Technologies is a leading designer and manufacturer of high performance MEMS inertial sensors, systems and integrated GPS. Gladiator is a supplier to Tier 1 OEM’s, Governments and Laboratories.  Founded in 2005, the company is located and headquartered in Snoqualmie, WA, USA, near Seattle in Washington State. Gladiator Technologies is proud to maintain an AS9100D Certification. Their Engineering team holds over 100 patents in MEMS Sensor and system design. Their repeatable manufacturing systems have fully automated environmental conditioning and calibration test equipment scaled for high volume production. Their manufacturing capabilities employ both Lean Manufacturing and Six Sigma tools with several of our staff either Black Belt or Green Belt certified. A comprehensive ERP suite is utilised for all company processes and includes bar code labour costing, electronic record archiving, automated reporting and analysis, MRP, Repair, Finance, Shipping and CRM modules. Gladiator Technologies products are NON-ITAR and do not require a validated export license.

See all Gladiator Technologies’ products here.

Follow us on Facebook.