MA16 Moving-coil meter

Moving-coil meters MA16, MB16, MA17, MA19 and MA12 types are designed to measure d.c. voltage or d.c. current and other physical quantities converted into a current or voltage standard signal.

 

Description

Lumel MA16, MB16, MA17, MA19 and MA12 Moving-coil meters types are designed to measure d.c. voltage or d.c. current and other physical quantities converted into a current or voltage standard signal.

The panel moving-coil meters MA12, MA16, MB16, MA17 and MA19 are designed to measure current of DC voltage. Magnetoelectric meters with built-in rectifier. MA12P, MA17P, MA19P are intended for measuring the effective currents and alternating current with sinusoidal waveform. Measurement of the current and voltage of the non-sinusoidal waveform is subject to a large error proportional to the degree of deformation of the waveform. What follows from the principle of measuring the rectifier device, which reacts to the average value of the straight-run, but it is calibrated like this to indicate the effective value of the sinusoidal waveform. The noninusoidal course is appropriately characterised, The measurement error is calculated. Therefore, the requirements for the influence of the shape of the curve for the medium-responsive instrument (straightened) are not specified in the standard EN60051-2.

Lumel are the producers of automation devices for measurement, control, transmission and visualisation of various industrial processes. They also provide Services of designing and manufacturing of automation systems.

Since 1954 Lumel brand has been known as a producer of quality measuring devices and high-pressure die-casting all over the world. Their high position in the market has been achieved thanks to continuous development, employees and modern technology in areas of research, design and production. Lumel delivers complex solutions for power and industrial automation sector as well as for automobile, chemical, steel, or HVAC industries

Their objective is to provide comprehensive solutions by designing intelligent systems based on the electronics Lumel manufactures, which are measuring and regulating equipment for industrial, automotive and military applications, as well as through service production of electronics.

View more Lumel products.

Follow us on Facebook

Characteristics Moving-coil meter MA16

Type of Scale: 90º
External dimensions 48 x 48 mm
Interchangeable scale: Yes
Measuring ranges:
Current:
Direct measurement:
Indirect measurement (Through the shunt*)
-
40µA ... 25A
1A ...15kA
Voltage:
Direct measurement
-
60mV ... 600V
Proof voltage: 3kV
Protection rating: IP52 (on request IP65)
Climate version: Normal or tropical
Rated operational conditions:
Ambient Temperature:
Relative air humidity
5...23...55ºC
25...85%
Class: 1.5