Description
Seika SB2I Sensor box containing two sensors and two signal conditioners with 4…20mA, 2-wire outputs.
The SB2I Sensor Box is a pressure die cast aluminium sensor housing (IP65) with two integrated sensors for measuring inclinations and/or accelerations along two axis.
As well as the sensors, the box contains two independent signal conditioners, each with a 4…20mA, 2-wire output, and two separate, highly stable voltage supply feeding off the corresponding current loop, one for each sensor. Furthermore, each signal conditioner includes an active low pass filter, whose upper cut-off frequency / settling time can be adjusted to suit the measurement task, an output stage with current limitation, a noise voltage filter and a diode bridge for unipolar connection to the current loop. Interference signals caused by unwanted ground currents are eliminated by electrically isolating each sensor and signal conditioner from each other and the housing.
A special electronic temperature compensation system can significantly reduce the temperature sensitivity of the implemented sensors. The compact PG cable gland and small housing size in combination with the 3-wire connection enable the use of this high quality measuring system in harsh operating conditions.
- Robust pressure die cast aluminium housing (IP65) with saltwater proof coating
- Twist free 4-point fastening of rigid, 3.2mm thick base PCB
- Two integrated signal conditioners with 4-20mA, 2 wire outputs
- Temperature drift compensation
- No separate supply voltage necessary
- All SEIKA sensors of the B-, BD- and N- series fit the housing and can be installed in different directions of operation
- Output signals calibrated to customer’s specifications
- Sensor and signal conditioners electrically isolated from housing
- both output channels are electrically isolated from and independent of each other
- EMC certified
- Internal, highly stable sensor supply voltages
- 10V – 30V terminal voltage
- Programmable dynamic response
- Loop current limitation
- High mechanical overload resistance
- Either connection polarity – possibility of 3 wire connection for both measuring loops
- Low pass filter with optional choice of cut-off frequency for suppression of interference frequencies
SEIKA develops, manufactures and distributes sensors for measurement of physical quantities and electronic and mechanical accessories for sensors. Inclinometers for nearly all existing tilt measurements and a series of robust accelerometers with integrated sensor electronics are SEIKA’s standard products. Next to these, SEIKA also manufactures a number of customer specific sensors.
Next to these standard products, Seika also manufactures level and humidity sensors for special applications as well as electronic components and sensor accessories.
For the full range of Seika products