N30U Programmable digital meter

The N30U meter is designed for the measurement of temperature, resistance and standard signals.

 

Description

Lumel N30U Programmable Digital meter is designed for the measurement of temperature, resistance and standard signals.

Features of the N30U Programmable Digital Meter:

► Four alarm outputs with signalling on LED diodes operating in six different modes
► Conversion of any measured value into an analogue signal: 0/4…20 mA or 0…10V
► Storage of minimal and maximal values for all measured quantities
► Mathematical functions – available from 2.04 version
► Meter programming from the keyboard or through the RS485 interface by means of the free eCon software

Lumel are the producers of automation devices for measurement, control, transmission and visualisation of various industrial processes. They also provide Services of designing and manufacturing of automation systems.

Since 1954 Lumel brand has been known as a producer of quality measuring devices and high-pressure die-casting all over the world. Their high position in the market has been achieved thanks to continuous development, employees and modern technology in areas of research, design and production. Lumel delivers complex solutions for power and industrial automation sector as well as for automobile, chemical, steel, or HVAC industries

Their objective is to provide comprehensive solutions by designing intelligent systems based on the electronics Lumel manufactures, which are measuring and regulating equipment for industrial, automotive and military applications, as well as through service production of electronics.

View more Lumel products.

Follow us on Facebook

► Input:
- Temperature:
--- Resistance thermometers: Pt100, Pt500, Pt1000
--- Thermocouples: J, K, N, E, R, S
- Resistance: 400 ohm, 4000 ohm
- Current: ±20mA
- Voltage: 0...10V, -10...60mV

► Output: relay (4), analogue (1), digital RS-485/MODBUS (1)
► Three-colour display - red, green and orange, programmable in three intervals of the measured value - facilitates the ovservation of measured value changes
- Digit height: 14mm
- Highlighted measuring unit

► Four alarm outputs with signalling on LED diodes operating in six different modes
► Conversion of any measured value into an analogue signal: 0/4...20 mA or 0...10V
► Storage of minimal and maximal values for all measured quantities
► Mathematical functions - available from 2.04 version
► Meter programming from the keyboard or through the RS485 interface by means of the free eCon software

One can reprogram following parameters:
- Display colour, individually in three intervals
- Thresholds of Displayed overflows
- Display precision of the result (decimal point)
- Unit highlighting
- Measurement averaging time
- Recount of indications (individual characteristics)
- Parameters of alarm outputs

► Supply: 85...253V AC/DC or 20...40V AC/DC
► Casing protection grade: IP65
► Overall dimensions: 96 x 48 x 64mm