Call

1800 266 876
or email us at sales@controldevices.net

Motorsport

Defence

Switchboards

Marine

Custom Design

Oil & Gas

NEW PRODUCTS

  • LARGE FORMAT DISPLAY with ProfiNET Control. Profinet RT class 1 V2.3 Digits of 57mm height. From 3 to 10 digits, 1 or 2 displaying sides. Possibility of fixed text optio...

    DN109/NN Large Format Display PROFINET 57mm

    LARGE FORMAT DISPLAY with ProfiNET Control. Profinet RT class 1 V2.3 Digits of 57mm height. From 3 to 10 digits,…

  • 16 series is design for hydraulic cylinder with limited head space or clevis rod ends hydraulic cylinder. Sensing rod is made by stainless steel which installed inside the hyd...

    16 series Linear Magnetostrictive Sensor

    16 series is design for hydraulic cylinder with limited head space or clevis rod ends hydraulic cylinder. Sensing rod is…

  • The Germanjet 19 series non-contact absolute position magnetostrictive sensor is specially designed for use in many harsh process applications such as refining, petrochemicals...

    19 Series Linear Magnetostrictive Sensor

    The Germanjet 19 series non-contact absolute position magnetostrictive sensor is specially designed for use in many harsh process applications such…

  • The Gladiator Technologies' GA50 series single axis, high-end open loop MEMS accelerometers are available in various sensing ranges. The accelerometer is based on a bulk micro...

    GA50 Accelerometers

    The Gladiator Technologies' GA50 series single axis, high-end open loop MEMS accelerometers are available in various sensing ranges. The accelerometer…

  • APEM develops and produces capacitive keyboards. These keyboards meet the requirements of industrial and professional markets as well as the trends of the consumer market:

    Capacitive Keyboards

    APEM develops and produces capacitive keyboards. These keyboards meet the requirements of industrial and professional markets as well as the…

  • The VTS series of vibration-tolerant tilt sensor offers an optimal combination of performance, safety and cost in dynamic applications such as industrial vehicles. VTS series ...

    VTS Series Vibration Tolerant Tilt Sensor

    The VTS series of vibration-tolerant tilt sensor offers an optimal combination of performance, safety and cost in dynamic applications such…

  • N30P meter is designed to measure electrical parameters in single-phase power network. The N30P has a 3-colour display with red, green or orange programmable options and the d...

    1-phase power network meter N30P

    N30P meter is designed to measure electrical parameters in single-phase power network. The N30P has a 3-colour display with red,…

  • The 1000 Series is a versatile range of low-cost switch joysticks, ideal for light to medium duty environments where proportional control is not a necessity. Configurable ...

    1000 Series Fingertip Joystick – Switched

    The 1000 Series is a versatile range of low-cost switch joysticks, ideal for light to medium duty environments where proportional control…

  • APEM 1000 series toggle switches are single pole configurations and available with solder lug, quick-connect or screw terminals. Available with optional insulated lever (X2...

    1000 Series Toggle Switch

    APEM 1000 series toggle switches are single pole configurations and available with solder lug, quick-connect or screw terminals. Available with…

  • The 1000HE series is a switch based joystick that is designed to work in harsh environments and applications. Typical applications include truck lift gates and electric vehic...

    1000HE Series Fingertip Joystick – Switched

    The 1000HE series is a switch based joystick that is designed to work in harsh environments and applications. Typical applications include…

  • APEM 10400 series 10mm Professional push button switches with threaded bushing diameter 10mm (.393) They push button switch has single and double pole momentary configurati...

    10400 Series 10mm Professional Push Button

    APEM 10400 series 10mm Professional push button switches with threaded bushing diameter 10mm (.393) They push button switch has single…

  • APEM 10600 series is a CECC approved single pole and double pole toggle switches including a 10mm diameter threaded bushing. The threaded bushing 10mm diameter (.393). 2 a...

    10600 Series Toggle Switch

    APEM 10600 series is a CECC approved single pole and double pole toggle switches including a 10mm diameter threaded bushing. The…

  • TER 10A Slip ring collector consists of rings coupled with brushes, designed for small jib cranes. Compact sized and equipped with 4 rings. Suitable for transmitting current w...

    10A Slip Ring Collector

    TER 10A Slip ring collector consists of rings coupled with brushes, designed for small jib cranes. Compact sized and equipped…

  • TER 10A/30A Slip Ring Collector consisting of rings coupled with brushes, designed to allow current to pass from a fixed to a rotating part and used to supply crane motors and...

    10A/30A Slip Ring Collector

    TER 10A/30A Slip Ring Collector consisting of rings coupled with brushes, designed to allow current to pass from a fixed…

  • MEC 10C is a slightly concave round cap that consists of two parts - top part that goes through panel and bottom part that is a diffuser. The two part design helps to provide ...

    10C Cap for Multimec 5G

    MEC 10C is a slightly concave round cap that consists of two parts - top part that goes through panel…

  • The MEC 10D Cap is a Ø16mm round cap with a slightly concave surface and designed to match the Controlmecâ„¢ navigational solution not only with the below panel height but al...

    10D + 10DWY Caps for Multimec 5G

    The MEC 10D Cap is a Ø16mm round cap with a slightly concave surface and designed to match the Controlmecâ„¢…

  • The simple and aesthetic cap is designed for a 1.5mm front panel. The cap has anti-rotation cut-off for printed caps*. MEC 10G cap series is based on Ultramec 6C Switches.  ...

    10G Cap for Ultramec 6C

    The simple and aesthetic cap is designed for a 1.5mm front panel. The cap has anti-rotation cut-off for printed caps*.…

  • MEC 10Q has a large square cap with a flat top. The cap has three standard legend types available: pad printed, reverse printed and hard paint laser etched. There is also an o...

    10Q Cap for Multimec 5G

    MEC 10Q has a large square cap with a flat top. The cap has three standard legend types available: pad…

  • MEC 10QM is a large square cap with a metal plate that has many standard legend options. There is also an optional front panel sealing to IP65. LEDs on the PCB are required fo...

    10QM Cap for Multimec 5G

    MEC 10QM is a large square cap with a metal plate that has many standard legend options. There is also…

  • MEC 10R is a large round cap with a slightly rounded top. The cap has three standard legend types available: pad printed, reverse printed and hard paint laser etched. There is...

    10R Cap for Multimec 5G

    MEC 10R is a large round cap with a slightly rounded top. The cap has three standard legend types available:…

  • MEC 10RF is a large round cap with a flat top. The cap has three standard legend types available: pad printed, reverse printed and hard paint laser etched. There is also an op...

    10RF Cap for Multimec 5G

    MEC 10RF is a large round cap with a flat top. The cap has three standard legend types available: pad…

  • MEC 10RM is a large round cap with a metal plate that has many standard legend options. There is also an optional front panel sealing to IP67. LED's on the PCB are required fo...

    10RM Cap for Multimec 5G

    MEC 10RM is a large round cap with a metal plate that has many standard legend options. There is also…

  • The round 10S cap belongs to the new cap series 10S/10T/10U/10V. The new series come in three different shapes: round, square and triangle. They can be combined into endles...

    10S Cap for Ultramec

    The round 10S cap belongs to the new cap series 10S/10T/10U/10V. The new series come in three different shapes: round,…

  • The square 10T cap belongs to the new cap series 10S/10T/10U/10V. The new series come in three different shapes: round, square and triangle. They can be combined into endle...

    10T Cap for Ultramec

    The square 10T cap belongs to the new cap series 10S/10T/10U/10V. The new series come in three different shapes: round,…

  • MEC round 10U cap belongs to the new cap series 10S / 10T / 10U / 10V for the Ultramec switch range. The new series come in three different shapes: round, square and triang...

    10U Cap for Ultramec

    MEC round 10U cap belongs to the new cap series 10S / 10T / 10U / 10V for the Ultramec…

  • MEC triangle 10V cap belongs to the new cap series 10S / 10T / 10U / 10V for the Ultramec switch range. The new series come in three different shapes: round, square and tri...

    10V Cap for Ultramec

    MEC triangle 10V cap belongs to the new cap series 10S / 10T / 10U / 10V for the Ultramec…

  • APEM 11000 series switches are specially manufactured for defence and telecommunications applications. These switches are approved CECC 96201-005 and CECC 96201-008 and are...

    11000 Series Toggle

    APEM 11000 series switches are specially manufactured for defence and telecommunications applications. These switches are approved CECC 96201-005 and CECC…

  • The Germanjet 12 series non-contact absolute position transducer is specially designed for parison control. It provides feedback of the valve position to controller to precise...

    12 series Linear Magnetostrictive Sensor

    The Germanjet 12 series non-contact absolute position transducer is specially designed for parison control. It provides feedback of the valve…

  • APEM 1200 series are momentary push button switches with round plunger. Butt action contacts, double break. NF (EN 61058-1), UL and CSA approved. Normally open or normally clo...

    1200 Series Momentary Push Button

    APEM 1200 series are momentary push button switches with round plunger. Butt action contacts, double break. NF (EN 61058-1), UL…

  • APEM 12000 Series toggle switches specially manufactured for defence, telecommunications and other industrial applications. 1, 2, 3 and 4 pole configurations, silver, gold-pla...

    12000 Series Panel Mounted Toggle

    APEM 12000 Series toggle switches specially manufactured for defence, telecommunications and other industrial applications. 1, 2, 3 and 4 pole…

  • APEM 12000X778 Series range of professional toggle switches is suitable for use in military and other high specification environments. CECC and MIL approved, the 12000X778 tog...

    12000X778 Series Toggle Switch

    APEM 12000X778 Series range of professional toggle switches is suitable for use in military and other high specification environments. CECC…

  • APEM 1200MR series are robust momentary push button switches with metal plugger. Butt action contacts with double break. It is UL and CSA approved.  

    1200MR Series Robust Momentary Push Button

    APEM 1200MR series are robust momentary push button switches with metal plugger. Butt action contacts with double break. It is…

  • The Gemanjet 13 series is designed in strict accordance with the requirements of the mobile machinery industry. Its compact shape can be fully integrated with the hydraulic cy...

    13 series Linear Magnetostrictive Sensor

    The Gemanjet 13 series is designed in strict accordance with the requirements of the mobile machinery industry. Its compact shape…

  • APEM 13000 Series Professional Quick-Break Push Buttons are High reliability single pole and double pole momentary push buttons, with silver or gold-plated contacts. They a...

    13000 Series Professional Quick-break Push Button

    APEM 13000 Series Professional Quick-Break Push Buttons are High reliability single pole and double pole momentary push buttons, with silver…

  • APEM 13000X778 Series double pole double throw alternate action push buttons with highly reliable contacts suitable for low level or power applications. Their double shell cas...

    13000X778 Series Alternate action push button

    APEM 13000X778 Series double pole double throw alternate action push buttons with highly reliable contacts suitable for low level or…

  • APEM 13000X778 Series double pole double throw momentary push buttons with highly reliable contacts suitable for low level applications. Their double shell case construction p...

    13000X778 Series Momentary Push Button

    APEM 13000X778 Series double pole double throw momentary push buttons with highly reliable contacts suitable for low level applications. Their…

  • APEM 1400N Series Momentary push button switches with snap-in mounting and square plunger. They are a single pole. Butt action contacts, double break. Solder lug, straight PC ...

    1400N Series Momentary Push Button

    APEM 1400N Series Momentary push button switches with snap-in mounting and square plunger. They are a single pole. Butt action…

  • 16 series is design for hydraulic cylinder with limited head space or clevis rod ends hydraulic cylinder. Sensing rod is made by stainless steel which installed inside the hyd...

    16 series Linear Magnetostrictive Sensor

    16 series is design for hydraulic cylinder with limited head space or clevis rod ends hydraulic cylinder. Sensing rod is…

  • MEC 16300 is a rectangular cap with a convex top surface.There are many standard legend options available in pad print. 16300 cap series is mounted on Unimec series switches,...

    16300 Cap for Unimec

    MEC 16300 is a rectangular cap with a convex top surface.There are many standard legend options available in pad print.…

  • MEC 16700 is a square cap with a slightly concave top surface. There are many standard legend options available in pad print. 16700 cap series is mounted on Unimec series swi...

    16700 Cap for Unimec

    MEC 16700 is a square cap with a slightly concave top surface. There are many standard legend options available in…

  • The 17 series non-contact absolute position transducer is specially designed for hydraulic cylinder to provide precise, direct and absolute position feedback. Hydraulic body i...

    17 series Linear Magnetostrictive Sensor

    The 17 series non-contact absolute position transducer is specially designed for hydraulic cylinder to provide precise, direct and absolute position…

  • The Germanjet 18 series non-contacting absolute position transducer adopts the non-contact magnetostrictive measuring technology for precise, direct and absolute measurement. ...

    18 series Linear Magnetostrictive Sensor

    The Germanjet 18 series non-contacting absolute position transducer adopts the non-contact magnetostrictive measuring technology for precise, direct and absolute measurement.…

  • APEM 18000 series Snap-action momentary push button switches snap-action momentary push button switches with many terminal, mounting, and special option selections. The pus...

    18000 Series Snap-action Momentary Push Button

    APEM 18000 series Snap-action momentary push button switches snap-action momentary push button switches with many terminal, mounting, and special option…

  • The Germanjet 19 series non-contact absolute position magnetostrictive sensor is specially designed for use in many harsh process applications such as refining, petrochemicals...

    19 Series Linear Magnetostrictive Sensor

    The Germanjet 19 series non-contact absolute position magnetostrictive sensor is specially designed for use in many harsh process applications such…

  • Mec 1A is a rectangular rocker-action cap that can be combined into a custom keyboard with 1H/1ZA/1M. 1A cap series is mounted on Multimec 5G series switches. It has a 10.1...

    1A Cap for Multimec 5G

    Mec 1A is a rectangular rocker-action cap that can be combined into a custom keyboard with 1H/1ZA/1M. 1A cap series…

  • MEC 1B is a square rocker-action solution offering full front illumination option with the cap and spot illumination option with the lens in the bezel. Illumination option in ...

    1B Cap for Multimec 5G with 2C/2D Bezel

    MEC 1B is a square rocker-action solution offering full front illumination option with the cap and spot illumination option with…

  • MEC 1C is a square rocker-action solution offers spot illumination with the lens in the cap, plus optional spot illumination option also with the lens in the bezel. Illuminati...

    1C Multimec 5G Cap with 2C/2D Bezel

    MEC 1C is a square rocker-action solution offers spot illumination with the lens in the cap, plus optional spot illumination…

  • A round cap with standard print options. The cap has a chamfer and can be fully illuminated. 1D cap series is mounted on Multimec 3F or Illumec 4F series. MAIN FEATURES <...

    1D cap for Multimec 3F or Illumec 4F

    A round cap with standard print options. The cap has a chamfer and can be fully illuminated. 1D cap series…

  • MEC 1DS is a round cap with standard print options. The cap has a soft edge and can be fully illuminated. 1DS cap series is mounted on Multimec 5G series switches. It has a Ã...

    1DS Cap for Multimec 5G

    MEC 1DS is a round cap with standard print options. The cap has a soft edge and can be fully…

  • A round cap with a round lens and a chamfer. 1E cap series is mounted on Multimec 3F or Illumec 4F series. MAIN FEATURES

  • MEC 1ES is a round cap with a round lens and soft edges. 1ES cap series is mounted on Multimec 5G series switches. It has a Ø9.6 mm diameter. Available in standard cap colou...

    1ES cap for Multimec 5G

    MEC 1ES is a round cap with a round lens and soft edges. 1ES cap series is mounted on Multimec…

  • A round cap with a full front lens and a chamfer. There are many standard reverse printed legend options available. 1F cap series is mounted on Multimec 3F or Illumec 4F seri...

    1F cap for Multimec 3F or Illumec 4F

    A round cap with a full front lens and a chamfer. There are many standard reverse printed legend options available.…

  • MEC 1FS is a round cap with a full front lens and a soft edge. There are many standard reverse printed legend options available. 1FS cap series is mounted on Multimec 5G seri...

    1FS Cap for Multimec 5G

    MEC 1FS is a round cap with a full front lens and a soft edge. There are many standard reverse…

  • A flat round cap designed for under overlay use. The rounded edges prolong the lifetime of the overlay. 1GA cap series is mounted on Multimec 3F series. MAIN FEATURES

    1GA Cap for Multimec 3F

    A flat round cap designed for under overlay use. The rounded edges prolong the lifetime of the overlay. 1GA cap…

  • MEC 1GAS is a flat round cap designed for using under an overlay. The rounded edge prolongs the lifetime of the overlay. The cap can be ordered in transparent or frosted white...

    1GAS Cap for Multimec 5G

    MEC 1GAS is a flat round cap designed for using under an overlay. The rounded edge prolongs the lifetime of…

  • A flat round cap designed for under overlay use. The rounded edges prolong the lifetime of the overlay. 1GC cap series is mounted on Multimec 3F series. MAIN FEATURES

      ...

      1GC cap for Multimec 3F

      A flat round cap designed for under overlay use. The rounded edges prolong the lifetime of the overlay. 1GC cap…