Multimec Caps
-
A slightly concave round cap that consists of two parts - top part that goes through panel and bottom part that is a diffuser. The two part design helps to provide excellent i...
10C Cap for Multimec 5G
A slightly concave round cap that consists of two parts - top part that goes through panel and bottom part…
-
The MEC 10D Cap is a Ø16mm round cap with a slightly concave surface and designed to match the Controlmec™ navigational solution not only with the below panel height but al...
10D + 10DWY Caps for Multimec 5G
The MEC 10D Cap is a Ø16mm round cap with a slightly concave surface and designed to match the Controlmecâ„¢…
-
A large square cap with a flat top. The cap has three standard legend types available: pad printed, reverse printed and hard paint laser etched. There is also an optional fron...
10Q Cap for Multimec 5G
A large square cap with a flat top. The cap has three standard legend types available: pad printed, reverse printed…
-
A large square cap with a metal plate that has many standard legend options. There is also an optional front panel sealing to IP65. LEDs on the PCB are required for excellent ...
10QM Cap for Multimec 5G
A large square cap with a metal plate that has many standard legend options. There is also an optional front…
-
A large round cap with a slightly rounded top. The cap has three standard legend types available: pad printed, reverse printed and hard paint laser etched. There is also an op...
10R Cap for Multimec 5G
A large round cap with a slightly rounded top. The cap has three standard legend types available: pad printed, reverse…
-
A large round cap with a flat top. The cap has three standard legend types available: pad printed, reverse printed and hard paint laser etched. There is also an optional front...
10RF Cap for Multimec 5G
A large round cap with a flat top. The cap has three standard legend types available: pad printed, reverse printed…
-
A large round cap with a metal plate that has many standard legend options. There is also an optional front panel sealing to IP67. LED's on the PCB are required for excellent ...
10RM Cap for Multimec 5G
A large round cap with a metal plate that has many standard legend options. There is also an optional front…
-
A rectangular rocker-action cap that can be combined into a custom keyboard with 1H/1ZA/1M. 1A cap series is mounted on Multimec 5G series. MAIN FEATURES
- 10.1...
1A Cap for Multimec 5G
A rectangular rocker-action cap that can be combined into a custom keyboard with 1H/1ZA/1M. 1A cap series is mounted on…
- 10.1...
-
A square rocker-action solution offering full front illumination option with the cap and spot illumination option with the lens in the bezel. Illumination option in the bezel ...
1B Cap for Multimec 5G with 2C/2D Bezel
A square rocker-action solution offering full front illumination option with the cap and spot illumination option with the lens in…
-
A square rocker-action solution offers spot illumination with the lens in the cap, plus optional spot illumination option also with the lens in the bezel. Illumination option ...
1C Multimec 5G Cap with 2C/2D Bezel
A square rocker-action solution offers spot illumination with the lens in the cap, plus optional spot illumination option also with…
-
A round cap with standard print options. The cap has a chamfer and can be fully illuminated. 1D cap series is mounted on Multimec 3F or Illumec 4F series. MAIN FEATURES <...
1D cap for Multimec 3F or Illumec 4F
A round cap with standard print options. The cap has a chamfer and can be fully illuminated. 1D cap series…
-
A round cap with a full front lens and a chamfer. There are many standard reverse printed legend options available. 1F cap series is mounted on Multimec 3F or Illumec 4F seri...
1F cap for Multimec 3F or Illumec 4F
A round cap with a full front lens and a chamfer. There are many standard reverse printed legend options available.…
-
A round cap with a full front lens and a soft edge. There are many standard reverse printed legend options available. 1FS cap series is mounted on Multimec 5G series. MAIN...
1FS Cap for Multimec 5G
A round cap with a full front lens and a soft edge. There are many standard reverse printed legend options…
-
A flat round cap designed for under overlay use. The rounded edges prolong the lifetime of the overlay. 1GA cap series is mounted on Multimec 3F series. MAIN FEATURES
1GA Cap for Multimec 3F
A flat round cap designed for under overlay use. The rounded edges prolong the lifetime of the overlay. 1GA cap…
-
A flat round cap designed for using under an overlay. The rounded edge prolongs the lifetime of the overlay. The cap can be ordered in transparent or frosted white for full il...
1GAS Cap for Multimec 5G
A flat round cap designed for using under an overlay. The rounded edge prolongs the lifetime of the overlay. The…
-
A flat round cap designed for under overlay use. The rounded edges prolong the lifetime of the overlay. 1GC cap series is mounted on Multimec 3F series. MAIN FEATURES
- ...
1GC cap for Multimec 3F
A flat round cap designed for under overlay use. The rounded edges prolong the lifetime of the overlay. 1GC cap…
-
A flat round cap designed for under overlay use. The rounded edge prolongs the lifetime of the overlay. The cap can be ordered in transparent or frosted white for full illumin...
1GCS Cap for Multimec 5G
A flat round cap designed for under overlay use. The rounded edge prolongs the lifetime of the overlay. The cap…
-
An illuminated rectangular rocker-action cap that can be combined into a custom keyboard with 1A/1ZA/1M. 1H cap series is mounted on Multimec 5G series. MAIN FEATURES
1H Cap for Multimec 5G
An illuminated rectangular rocker-action cap that can be combined into a custom keyboard with 1A/1ZA/1M. 1H cap series is mounted…
-
A fully illuminated round cap with a slightly rounded top in 7 total building height options. 1IS cap series is mounted on Multimec 5G series. MAIN FEATURES
- Ã...
1IS cap for Multimec 5G illuminated
A fully illuminated round cap with a slightly rounded top in 7 total building height options. 1IS cap series is…
- Ã...
-
A round cap with a rounded edge designed for using under an overlay. The cap has a low total building height and full illumination option. 1JS cap series is mounted on Multim...
1JS Cap for Multimec 5G
A round cap with a rounded edge designed for using under an overlay. The cap has a low total building…
-
A flat square cap with an optional bezel 2K. In case of the illuminated version there is an option of inserting a custom legend in between the diffuser and the lid. 1K cap se...
1K cap for Multimec 3F or Illumec 4F
A flat square cap with an optional bezel 2K. In case of the illuminated version there is an option of…
-
A convex square cap with an optional bezel 2K. There is also an option of inserting a custom legend in between the diffuser and the lid. 1KB cap series is mounted on Multimec ...
1KB cap for Multimec 3F or Illumec 4F
A convex square cap with an optional bezel 2K. There is also an option of inserting a custom legend in…
-
A convex square cap with an optional bezel 2K. There is also an option of inserting a custom legend in between the diffuser and the lid. 1KBS cap series is mounted on Multime...
1KBS Cap for Multimec 5G
A convex square cap with an optional bezel 2K. There is also an option of inserting a custom legend in…
-
A concave square cap with an optional bezel 2K. There is also an option of inserting a custom legend in between the diffuser and the lid. 1KC cap series is mounted on Multimec...
1KC cap for Multimec 3F or Illumec 4F
A concave square cap with an optional bezel 2K. There is also an option of inserting a custom legend in…
-
A concave square cap with an optional bezel 2K. There is also an option of inserting a custom legend in between the diffuser and the lid. 1KCS cap series is mounted on Multim...
1KCS Cap for Multimec 5G
A concave square cap with an optional bezel 2K. There is also an option of inserting a custom legend in…
-
A flat square cap with an optional bezel 2K. In case of the illuminated version there is an option of inserting a custom legend in between the diffuser and the lid. 1KS cap s...
1KS Cap for Multimec 5G
A flat square cap with an optional bezel 2K. In case of the illuminated version there is an option of…
-
A round cap with a slightly rounded top and a round lens. The cap is available in 7 total building height options. 1LS cap series is mounted on Multimec 5G series. MAIN F...
1LS Cap for Multimec 5G
A round cap with a slightly rounded top and a round lens. The cap is available in 7 total building height…
-
A tear-drop shaped cap that is excellent for creative layouts for navigation or indicating. 1N cap series is mounted on Multimec 3F or Illumec 4F Series. MAIN FEATURES
1N Cap Multimec 3F or Illumec 4F
A tear-drop shaped cap that is excellent for creative layouts for navigation or indicating. 1N cap series is mounted on…
-
A tear-drop shaped cap that is excellent for creative layouts for navigation or indicating. 1NS cap series is mounted on Multimec 5G series. MAIN FEATURES
- Ø9...
1NS Cap for Multimec 5G
A tear-drop shaped cap that is excellent for creative layouts for navigation or indicating. 1NS cap series is mounted on…
- Ø9...
-
A concave rectangular cap with full illumination option. 1P Cap series is mounted on Multimec 3F or Illumec 4F Series. MAIN FEATURES
- 6.5 x 12.5 mm
- ...
1P cap for Multimec 3F or Illumec 4F
A concave rectangular cap with full illumination option. 1P Cap series is mounted on Multimec 3F or Illumec 4F Series.…
-
A concave rectangular cap with a full illumination option. 1PS cap series is mounted on Multimec 5E/5G series. MAIN FEATURES
- 6.5 x 12.5 mm
- Standar...
1PS Cap for Multimec 5E/5G
A concave rectangular cap with a full illumination option. 1PS cap series is mounted on Multimec 5E/5G series. MAIN FEATURES…
-
A round cap with a slightly rounded top in 3 total building height options. 1S cap series is mounted on Multimec 3F or Illumec 4F series. MAIN FEATURES
- Ø6.5 m...
1S Cap for the Multimec 3F or Illumec 4F
A round cap with a slightly rounded top in 3 total building height options. 1S cap series is mounted on…
- Ø6.5 m...
-
A square cap with a rounded top and optional front panel sealing to IP65. The 1T cap together with 1V can be designed into a navigation unit or a keyboard. 1T cap series is mo...
1T Cap for Multimec 3F or Illumec 4F
A square cap with a rounded top and optional front panel sealing to IP65. The 1T cap together with 1V…
-
A square cap with a rounded top and optional front panel sealing to IP65. The 1TS cap together with 1VS can be designed into a navigation unit or a keyboard. 1TS cap series i...
1TS Cap for Multimec 5G
A square cap with a rounded top and optional front panel sealing to IP65. The 1TS cap together with 1VS…
-
A half-eclipse shaped cap with a rounded top and optional front panel sealing to IP65. The 1V cap together with1T can be designed into a navigation unit or a keyboard. 1V cap ...
1V Cap for Multimec 3F or Illumec 4F
A half-eclipse shaped cap with a rounded top and optional front panel sealing to IP65. The 1V cap together with1T…
-
A half-ellipse shaped cap with a rounded top and optional front panel sealing to IP65. The 1VS cap together with 1TS can be designed into a navigation unit or a keyboard. 1...
1VS Cap for Multimec 5G
A half-ellipse shaped cap with a rounded top and optional front panel sealing to IP65. The 1VS cap together with…